CAT 6 Cable

POWERCAT 6 4 PAIR LS0H CABLE, PURPLE, CM RATED, 305M REEL IN A BOX

'

PART NO: CAA-00200

Molex PowerCat 6 (C6) 4 Pair U/UTP cable has been designed to support high speed data transmission systems such as Gigabit Ethernet. The cable is part of the PowerCat 6 range of products that are designed to comply with the Category 6 specification. We recommend that the full range of PowerCat 6 products are used in a system to maximise cabling performance, providing extended frequency response and enhanced bandwidth.

·         Enhanced performance 4 pair LS0H cable

·         Category 6 compliant

·         Colour coded for ease of termination

·         RoHS compliant

Technical Specification

MECHANICAL
Conductor: 23 AWG Solid bare copper
Conductor Material: Solid bare copper
Nom.O.D.(mm): 0.550 +/- +0.004
Insulation Material: HDPE
Diameter: 0.98±0.05mm
Sheath
Thickness: 0.55±0.05 mm
External O.D.: 6.1±0.4mm
Material: LS0H
Colour: Purple
Nominal Weight: 42.5kg/km
Sheath Physical Properties
Before Aging Tensile Strength (Mpa): ≥10.0
Elongation(%): ≥125
Aging Period (°C×hrs): 100°C×24h×7d
After Aging Tensile Strength (Mpa): ≥8.0
Elongation(%): ≥=100
Cold bend(-20±2°C×4h): 8×Cable O.D., no visible cracks

ELECTRICAL
NVP (%): 68
At 20°C:
1.0-250.0MHz Impedance ((Ω): 100±15
1.0-250.0MHz Delay Skew (ns/100m): ≤45
DC Resistance (Ω/100m) max: 9.5
DC Conductor Resistance Unbalance (%) max: 5.0

COMMERCIAL STANDARDS
ISO/IEC 11801
EIA/TIA -568.2-D
IEC 60332-1
IEC 60332-3-22

ENVIRONMENTAL STANDARDS
RoHS compliant

POWERCAT 6 C6 CABLE 305M REEL IN A BOX U/UTP LSZH 332.1

PART NO: CAA-00267

Molex PowerCat 6 (C6) 4 Pair UTP???cable has been designed to support high speed data transmission systems. The cable is part of the PowerCat 6 range of products that are designed to comply with the Category 6 specification.

We recommend that the full range of PowerCat 6 products are used in a system to maximize cabling performance, providing extended frequency response and enhanced bandwidth.

·         Enhanced performance 4 pair LSZH cable

·         Category 6 compliant

·         Colour coded for ease of termination

·         305m reel in a box

·         RoHS compliant

Technical Specification

MECHANICAL
Conductor Size : 23 AWG
Primary Insulation : Solid Polyethylene
Nominal O.D.: 1.045 + 0.02mm
Twinning: Right hand lay
Sheath Type: LSZH 332.1
Minimal Wall: 0.55mm
Nominal O.D: 6.1mm
Cable weight: 13.6 Kgs Nominal
NVP: 67%

ELECTRICAL
D.C. Resistance : 9.38 ohm/100m

COMMERCIAL STANDARDS
EN 50173 2nd Edition
ISO/IEC 11801 2nd Edition
EIA/TIA 568C.2
IEC 60754-2
IEC 61034-2

FIRE PROPAGATION TESTS
UL 1581
VW1, IEC 60332.1
EN0256-2-1
MECHANICAL
Conductor Size : 23 AWG
Primary Insulation : Solid Polyethylene
Nominal O.D.: 1.045 + 0.02mm
Twinning: Right hand lay
Sheath Type: LSZH 332.1
Minimal Wall: 0.55mm
Nominal O.D: 6.1mm
Cable weight: 13.6 Kgs Nominal
NVP: 67%

ELECTRICAL
D.C. Resistance : 9.38 ohm/100m

COMMERCIAL STANDARDS
EN 50173 2nd Edition
ISO/IEC 11801 2nd Edition
EIA/TIA 568C.2
IEC 60754-2
IEC 61034-2

FIRE PROPAGATION TESTS
UL 1581
VW1, IEC 60332.1
EN0256-2-1
Performance Characters - Category 6 EIA/TIA 568.C.2

ENVIRONMENTAL STANDARDS
RoHS compliant

POWERCAT 6 4 PAIR PVC CABLE, GREY, CM RATED, 305M BOX

'

PART NO: CAA-00176

Molex Premise Networks PowerCat 6 (C6) 4 Pair U/UTP cable has been designed to support high speed data transmission systems such as Gigabit Ethernet. The cable is part of the PowerCat 6 range of products that are designed to comply with the Category 6 specification. We recommend that the full range of PowerCat 6 products are used in a system to maximize cabling performance, providing extended frequency response and enhanced bandwidth.

·         Compliant to TIA / EIA 568-B,2-1 Category 6 cable specifications

·         Supports ultrahigh speed data networks such as Gigabit Ethernet (1000 Base-T and 1000 Base-TX) and beyond

·         Incorporates central spine maintaining pair separation during installation to ensure premium performance after installation

·         UL listed

·         CM rated cable

·         Supplied in convenient 305m “Reel in a box”

·         RoHS compliant

Technical Specification

Mechanical Characteristics
Conductor: Solid Bare Copper
AWG: 23
Insulation: PE
Average Thickness (±0.03mm): 0.23
Min. Point Thickness (mm): 0.18
Insulation Dia. (±0.05mm): 1.04
Twisting Lay Length (mm): 30 underneath
Cabling Lay Length (±10mm): 140
Filler: PE
Jacket: PVC
Average Thickness (±0.05mm): 0.50
Min. Point Thickness (mm): 0.46
Weight (kg/km): 14
Operating Temperature: maximum: 75°C
Maximum Pulling Force: 100N

Electrical/Optical Characteristics
NVP (%): As listed on sheath
Delay Skew: 45ns Max
Impedance: 100 ± 15 Ohms
Current Rating: 1.5 A Max
Conductor DC Resistance: 66.5Ω/km
Voltage: 150VAC
Propagation delay: 535ns/100m @ 250MHz
Mutual Capacitance: 5.6nF/100m Nominal
Insulation Resistance: 500 MΩ Minimum
Dielectric Strength: 1000 V RMS
Contact Resistance: 10 mΩ Max

Commercial Standards
Category 6 EIA/TIA 568 C.2

6-Pak Adapter Plates fit directly into most Molex fiber management enclosures. This simple design requires no tooling as the plates install with a simple snap rivet, making installation and changes are simple

The Molex PowerCat 6 Shielded DataGate Jack is a key component of the PowerCat 6 shielded channel compliant system. Designed to support a growing requirement for shielded cabling systems offering enhanced EMC protection and improved Alien Crosstalk performance.

This superior connector provides 360° shielded protection by utilizing a two piece tin/nickel plated brass can that encloses the RJ45 IDC. The Shielded DataGate Jack provides 180° and 90° cable exit and includes a unique integral shutter that not only protects it from dust and contaminants, but the ingenious spring-loaded design also ejects improperly seated patch cords.

Suitable for high-speed data transmission, the Shielded DataGate Jack has been designed to exceed the highest electrical performance standards in the industry and has been independently tested and verified by ETL SEMKO for Category 6 component compliance. The Shielded DataGate Jack is also backwards compatible with Shielded C5E systems.

Molex recommend that the full range of PowerCat 6 Shielded products are used in a system to maximize cabling performance. The PowerCat 6 Shielded System has been independently verified by Intertek ETL SEMKO as compliant with ISO/IEC TR24570 and TIA/EIA TSB-155 technical reports for the support of 10G BASE-T Channels and Permanent Links.

Established in 1998, having 20+ years of experience GRAMMY Communications Pvt. Ltd. is a professionally managed company engaged in Integration, Services and Distribution of Video Conferencing Equipment, Audio Video Equipment, Board Room Solution, Video Wall Display, IP-PBX System and much more. We are registered Seller of GeM (Government e Marketplace). The guiding principle of our Organization is to provide High Quality Products with High Degree of Customer Satisfaction and Impeccable Service.  The products being offered by us have also one important consideration i.e., Cost Effectiveness, to say in simple word “Price Competitive”. We deliver the customize solutions, not only products. Our solutions help customer to get the optimize benefits from products. We ensure prompt delivery of service/ product.